# Copyright 2014 Hewlett-Packard Development Company, L.P.
# Copyright 2014 Samsung Electronics
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
"""Trace a subunit stream in reasonable detail and high accuracy."""
import argparse
import functools
import os
import re
import sys
import pbr.version
import subunit
import testtools
from stestr import colorizer
from stestr import results
# NOTE(mtreinish) on python3 anydbm was renamed dbm and the python2 dbm module
# was renamed to dbm.ndbm, this block takes that into account
try:
import anydbm as dbm
except ImportError:
import dbm
DAY_SECONDS = 60 * 60 * 24
FAILS = []
RESULTS = {}
def total_seconds(timedelta):
# NOTE(mtreinish): This method is built-in to the timedelta class in
# python >= 2.7 it is here to enable it's use on older versions
return (
(timedelta.days * DAY_SECONDS + timedelta.seconds) * 10**6
+ timedelta.microseconds
) / 10**6
[docs]def cleanup_test_name(name, strip_tags=True, strip_scenarios=False):
"""Clean up the test name for display.
By default we strip out the tags in the test because they don't help us
in identifying the test that is run to it's result.
Make it possible to strip out the testscenarios information (not to
be confused with tempest scenarios) however that's often needed to
indentify generated negative tests.
"""
if strip_tags:
tags_start = name.find("[")
tags_end = name.find("]")
if tags_start > 0 and tags_end > tags_start:
newname = name[:tags_start]
newname += name[tags_end + 1 :]
name = newname
if strip_scenarios:
tags_start = name.find("(")
tags_end = name.find(")")
if tags_start > 0 and tags_end > tags_start:
newname = name[:tags_start]
newname += name[tags_end + 1 :]
name = newname
return name
def get_duration(timestamps):
start, end = timestamps
if not start or not end:
duration = ""
else:
delta = end - start
duration = "%d.%06ds" % (
delta.days * DAY_SECONDS + delta.seconds,
delta.microseconds,
)
return duration
[docs]def find_worker(test):
"""Get the worker number.
If there are no workers because we aren't in a concurrent environment,
assume the worker number is 0.
"""
for tag in test["tags"]:
if tag.startswith("worker-"):
return int(tag[7:])
return 0
# Print out stdout/stderr if it exists, always
[docs]def print_attachments(stream, test, all_channels=False, show_binary_attachments=False):
"""Print out subunit attachments.
Print out subunit attachments that contain content. This
runs in 2 modes, one for successes where we print out just stdout
and stderr, and an override that dumps all the attachments.
"""
channels = ("stdout", "stderr")
for name, detail in test["details"].items():
# NOTE(sdague): the subunit names are a little crazy, and actually
# are in the form pythonlogging:'' (with the colon and quotes)
name = name.split(":")[0]
if detail.content_type.type == "test":
detail.content_type.type = "text"
if all_channels or name in channels:
title = "Captured %s:" % name
stream.write("\n{}\n{}\n".format(title, ("~" * len(title))))
# indent attachment lines 4 spaces to make them visually
# offset
if detail.content_type.type == "text":
for line in detail.iter_text():
stream.write(" %s\n" % line)
elif show_binary_attachments: # binary
for line in detail.iter_bytes():
stream.write(" %s\n" % line)
def find_test_run_time_diff(test_id, run_time):
times_db_path = os.path.join(
os.path.join(os.getcwd(), ".testrepository"), "times.dbm"
)
if os.path.isfile(times_db_path):
try:
test_times = dbm.open(times_db_path)
except Exception:
return False
try:
avg_runtime = float(test_times.get(str(test_id), False))
except Exception:
try:
avg_runtime = float(test_times[str(test_id)])
except Exception:
avg_runtime = False
if avg_runtime and avg_runtime > 0:
run_time = float(run_time.rstrip("s"))
perc_diff = ((run_time - avg_runtime) / avg_runtime) * 100
return perc_diff
return False
def show_outcome(
stream,
test,
print_failures=False,
failonly=False,
enable_diff=False,
threshold="0",
abbreviate=False,
enable_color=False,
suppress_attachments=False,
all_attachments=False,
show_binary_attachments=True,
):
global RESULTS
status = test["status"]
# TODO(sdague): ask lifeless why on this?
if status == "exists":
return
worker = find_worker(test)
name = cleanup_test_name(test["id"])
duration = get_duration(test["timestamps"])
if worker not in RESULTS:
RESULTS[worker] = []
RESULTS[worker].append(test)
# don't count the end of the return code as a fail
if name == "process-returncode":
return
for color in [colorizer.AnsiColorizer, colorizer.NullColorizer]:
if not enable_color:
color = colorizer.NullColorizer(stream)
break
if color.supported():
color = color(stream)
break
if status == "fail" or status == "uxsuccess":
FAILS.append(test)
if abbreviate:
color.write("F", "red")
else:
stream.write("{{{}}} {} [{}] ... ".format(worker, name, duration))
color.write("FAILED", "red")
stream.write("\n")
if not print_failures:
print_attachments(
stream,
test,
all_channels=True,
show_binary_attachments=show_binary_attachments,
)
elif not failonly:
if status == "success" or status == "xfail":
if abbreviate:
color.write(".", "green")
else:
out_string = "{{{}}} {} [{}".format(worker, name, duration)
perc_diff = find_test_run_time_diff(test["id"], duration)
if enable_diff:
if perc_diff and abs(perc_diff) >= abs(float(threshold)):
if perc_diff > 0:
out_string = out_string + " +%.2f%%" % perc_diff
else:
out_string = out_string + " %.2f%%" % perc_diff
stream.write(out_string + "] ... ")
color.write("ok", "green")
stream.write("\n")
if not suppress_attachments:
print_attachments(
stream,
test,
all_channels=all_attachments,
show_binary_attachments=show_binary_attachments,
)
elif status == "skip":
if abbreviate:
color.write("S", "blue")
else:
reason = test["details"].get("reason", "")
if reason:
reason = ": " + reason.as_text()
stream.write("{{{}}} {} ... ".format(worker, name))
color.write("SKIPPED", "blue")
stream.write("%s" % (reason))
stream.write("\n")
else:
if abbreviate:
stream.write("%s" % test["status"][0])
else:
stream.write(
"{{{}}} {} [{}] ... {}\n".format(
worker, name, duration, test["status"]
)
)
if not print_failures:
print_attachments(
stream,
test,
all_channels=True,
show_binary_attachments=show_binary_attachments,
)
stream.flush()
[docs]def print_fails(stream):
"""Print summary failure report."""
if not FAILS:
return
stream.write("\n==============================\n")
stream.write("Failed %s tests - output below:" % len(FAILS))
stream.write("\n==============================\n")
for f in FAILS:
stream.write("\n%s\n" % f["id"])
stream.write("%s\n" % ("-" * len(f["id"])))
print_attachments(stream, f, all_channels=True)
stream.write("\n")
def count_tests(key, value):
count = 0
for k, v in RESULTS.items():
for item in v:
if key in item:
if re.search(value, item[key]):
count += 1
return count
def get_stuck_in_progress():
key = "status"
match = re.compile("^inprogress$")
in_progress = []
for k, v in RESULTS.items():
for item in v:
if key in item:
if match.search(item[key]):
in_progress.append(item["id"])
return in_progress
def run_time():
runtime = 0.0
for k, v in RESULTS.items():
for test in v:
test_dur = get_duration(test["timestamps"]).strip("s")
# NOTE(toabctl): get_duration() can return an empty string
# which leads to a ValueError when casting to float
if test_dur:
runtime += float(test_dur)
return runtime
def worker_stats(worker):
tests = RESULTS[worker]
num_tests = len(tests)
stop_time = tests[-1]["timestamps"][1]
start_time = tests[0]["timestamps"][0]
if not start_time or not stop_time:
delta = "N/A"
else:
delta = stop_time - start_time
return num_tests, str(delta)
def print_summary(stream, elapsed_time):
stream.write("\n======\nTotals\n======\n")
stream.write(
"Ran: {} tests in {:.4f} sec.\n".format(
count_tests("status", ".*"), total_seconds(elapsed_time)
)
)
stream.write(" - Passed: %s\n" % count_tests("status", "^success$"))
stream.write(" - Skipped: %s\n" % count_tests("status", "^skip$"))
stream.write(" - Expected Fail: %s\n" % count_tests("status", "^xfail$"))
stream.write(" - Unexpected Success: %s\n" % count_tests("status", "^uxsuccess$"))
stream.write(" - Failed: %s\n" % count_tests("status", "^fail$"))
stream.write("Sum of execute time for each test: %.4f sec.\n" % run_time())
# we could have no results, especially as we filter out the process-codes
if RESULTS:
stream.write("\n==============\nWorker Balance\n==============\n")
for w in range(max(RESULTS.keys()) + 1):
if w not in RESULTS:
stream.write(" - WARNING: missing Worker %s!\n" % w)
else:
num, time = worker_stats(w)
out_str = " - Worker {} ({} tests) => {}".format(w, num, time)
if time.isdigit():
out_str += "s"
out_str += "\n"
stream.write(out_str)
__version__ = pbr.version.VersionInfo("stestr").version_string()
def parse_args():
parser = argparse.ArgumentParser()
parser.add_argument("--version", action="version", version="%s" % __version__)
parser.add_argument(
"--no-failure-debug",
"-n",
action="store_true",
dest="print_failures",
help="Disable printing failure " "debug information in realtime",
)
parser.add_argument(
"--fails",
"-f",
action="store_true",
dest="post_fails",
help="Print failure debug " "information after the stream is proccesed",
)
parser.add_argument(
"--failonly",
action="store_true",
dest="failonly",
help="Don't print success items",
default=(os.environ.get("TRACE_FAILONLY", False) is not False),
)
parser.add_argument(
"--abbreviate",
"-a",
action="store_true",
dest="abbreviate",
help="Print one character status" "for each test",
)
parser.add_argument(
"--perc-diff",
"-d",
action="store_true",
dest="enable_diff",
help="Print percent change in run time on each test ",
)
parser.add_argument(
"--diff-threshold",
"-t",
dest="threshold",
help="Threshold to use for displaying percent change "
"from the avg run time. If one is not specified "
"the percent change will always be displayed",
)
parser.add_argument(
"--no-summary",
action="store_true",
help="Don't print the summary of the test run after " " completes",
)
parser.add_argument(
"--color", action="store_true", help="Print results with colors"
)
return parser.parse_args()
def trace(
stdin,
stdout,
print_failures=False,
failonly=False,
enable_diff=False,
abbreviate=False,
color=False,
post_fails=False,
no_summary=False,
suppress_attachments=False,
all_attachments=False,
show_binary_attachments=False,
):
stream = subunit.ByteStreamToStreamResult(stdin, non_subunit_name="stdout")
outcomes = testtools.StreamToDict(
functools.partial(
show_outcome,
stdout,
print_failures=print_failures,
failonly=failonly,
enable_diff=enable_diff,
abbreviate=abbreviate,
enable_color=color,
suppress_attachments=suppress_attachments,
all_attachments=all_attachments,
show_binary_attachments=show_binary_attachments,
)
)
summary = testtools.StreamSummary()
result = testtools.CopyStreamResult([outcomes, summary])
result = testtools.StreamResultRouter(result)
cat = subunit.test_results.CatFiles(stdout)
result.add_rule(cat, "test_id", test_id=None)
result.startTestRun()
try:
stream.run(result)
finally:
result.stopTestRun()
start_times = []
stop_times = []
for worker in RESULTS:
start_times += [
x["timestamps"][0]
for x in RESULTS[worker]
if x["timestamps"][0] is not None
]
stop_times += [
x["timestamps"][1]
for x in RESULTS[worker]
if x["timestamps"][1] is not None
]
if print_full_output(stdout, start_times, stop_times, post_fails, no_summary):
return 1
return 0 if results.wasSuccessful(summary) else 1
[docs]def print_full_output(stdout, start_times, stop_times, post_fails, no_summary):
"""Print output plus edge case validation"""
if not start_times or count_tests("status", ".*") == 0:
print("The test run didn't actually run any tests", file=sys.stderr)
return 1
start_time = min(start_times)
stop_time = max(stop_times)
elapsed_time = stop_time - start_time
if post_fails:
print_fails(stdout)
if not no_summary:
print_summary(stdout, elapsed_time)
# NOTE(mtreinish): Ideally this should live in testtools streamSummary
# this is just in place until the behavior lands there (if it ever does)
if count_tests("status", "^xfail$") + count_tests("status", "^success$") == 0:
print("\nNo tests were successful during the run", file=sys.stderr)
return 1
in_progress = get_stuck_in_progress()
if in_progress:
print(
"\nThe following tests exited without returning a status\n"
"and likely segfaulted or crashed Python:",
file=sys.stderr,
)
for test in in_progress:
print("\n\t* %s" % test, file=sys.stderr)
return 1
def main():
args = parse_args()
exit(
trace(
sys.stdin,
sys.stdout,
args.print_failures,
args.failonly,
args.enable_diff,
args.abbreviate,
args.color,
args.post_fails,
args.no_summary,
)
)
if __name__ == "__main__":
main()